QSC Audio Products LLC

Control Q-SYS systems from your iOS device! Within Q-SYS Designer software, user control interfaces (UCIs) can be created, and nearly any element in the system can be placed in the UCIs for control and monitoring. This enables a near limitless array of control capability, all from your iOS device, including source selection buttons, Q-SYS PTZ camera controls (with video preview frames), lighting dimmer controls, projector on/off selector, signal meters, screen up/down, snapshot recall, volume control faders, and more. This app is designed for use with QSC's Q-SYS Platform onlyQ-SYS UCI deployment onto a Core processor for use with TSC touch screens, UCI viewer for PC and iOS app requires license activationVisit www.qsc.com/uci for more details.

Control your QSC DCP with your iOS device!The device connects to the DCPs via Ethernet and standard wi-fi routersPassword protection ensures control is limited to authorized devicesThe system is ideally suited to “boothless” theatres since theatre personnel do not need to physically access the equipment for daily operation and for troubleshooting in case of problems.

TouchMix-8/16 Control is an app for iPad, iPad mini, iPhone and iPod touch that provides wireless control of QSC TouchMix-8 and TouchMix-16 digital sound reinforcement mixers. Visit www.qsc.com for more information. The app is not intended to perform any audio mixing or processing tasks on its own. When run on the iPad and iPad mini, the TouchMix Control app closely follows the operational paradigm of the mixers. The iPad and the mixer GUI operate independently so it is possible for the iPad to act as an additional user interface that can display and control a set of functions completely different from those being controlled by the mixer’s screen and hardware. An alternate operation mode – Follow Mixer – is also available. With Follow Mixer engaged, the iPad follows the fader selection on the mixer. Touch a fader on the mixer and the iPad will display that channel’s Overview, EQ, Compressor, Sends or Gate screen. Touch a parameter on the iPad and the mixer’s rotary control will adjust it – or just drag on the iPad screen. When used without an..

Mobile Cinema DPM Controller Control your DPM wirelessly to: • Monitor inputs and output. • Monitor status. • Select audio presets. • Activate control preset • Adjust master volume and mute. Use DPM Manager to obtain the authentication for each DPM by scanning QR Code.

MP Install is used by designers and installers of business music systems to configure and control QSC MP-M40 or MP-M80 music and paging mixers. These mixers, offering unprecedented capabilities combined with ease of configuration and operation are intended for retail and hospitality applications in which paging messages and high-quality audio from various sources is routed to multiple zones. Live mixing functions are also supported for applications requiring reinforcement of entertainment, presentations or conferences MP Install provides the system designer and installer an attractive graphic environment and intuitive workflow to configure and tune the system. A Setup Wizard helps the installer keep track of tasks and easily navigate the MP-M. Onboard Intrinsic Correction™ (factory FIR/IIR presets) for QSC loudspeakers help maximize the performance and value of the system MP Install may be used to setup a mixer offline (no MP-M connected) or online. Connection to an MP-M is via Wi-Fi and requires a user supplied Wi-Fi router. A separate app, MP Manage supports day-to-day end user operation of basic system functions including zone level, source selection, scene recall, scheduling, and mixer..

MP Manage is an app for use by the staff of facilities with QSC MP-M40 or MP-M80 music and paging mixers installed. These mixers, offering unprecedented capabilities combined with ease of configuration and operation are intended for retail and hospitality applications in which paging messages and high-quality audio from various sources is routed to multiple zones. Live mixing functions are also supported for applications requiring reinforcement of entertainment, presentations or conferences. The functions available to the MP Manage user are determined by the installer of the MP-M40 or MP-M80. These functions may include: Zones – Select an audio source and adjust volume for one or more audio zones. Scenes – Recall and update scenes. Scheduler – Schedule the recall of some or all MP-M settings to support the activity schedule of a facility. Security – Allows the facility manager to grant or remove access to specific sets of functions to other staff members who are using MP Manage Player – Operates the USB Player Mixer – Provides control for the MP-M internal mixer. Paging – Supports wireless store and forward..

TouchMix-30 Control is an app for iPad, iPad mini, iPhone and iPod touch that provides wireless control of QSC TouchMix-30 Pro digital sound reinforcement mixers. The app is not intended to perform any audio mixing or processing tasks on its own. Visit www.qsc.com for more information. When run on the iPad and iPad mini, the TouchMix-30 Control app closely follows the operational paradigm of the mixer. The iPad and the mixer GUI operate independently so it is possible for the iPad to act as an additional user interface that can display and control a set of functions completely different from those being controlled by the mixer’s screen and hardware. An alternate operation mode – Follow Mixer – is also available. With Follow Mixer engaged, the iPad follows the fader selection on the mixer. Touch a fader on the mixer and the iPad will display that channel’s Overview, EQ, Compressor, Sends or Gate screen. Touch a parameter on the iPad and the mixer’s rotary control will adjust it – or just drag on the iPad screen. When used without an actual..