App Download

This little app gives quick and simple access to control any Air Conditioners that have been added to your HomeKit, and displays any temperature or humidity measurements. It has one screen, showing all the Acs in..
This little app gives quick and simple access to control any Air Conditioners that have been added to your HomeKit, and displays any temperature or humidity measurements. It has one screen, showing all the Acs in your HomeKit Home. The current temperature (and humidity if available) is displayed.Tap on the AC row to switch on to a default mode and target temperature. Long press to select a specific mode and temperature. Any temperature or humidity sensors on other devices are also displayed. Tap the gear icon in the bottom right to change the default mode and target temperature. Tap the house icon in the bottom left to switch between other Homes set up in your HomeKit configuration. If you have an AmbiClimate (http://www.ambiclimate.com) controller and use Ambi Bridge (https://www.brooker.mobi/ambi-bridge) to add it to HomeKit, then you can control any AC with this app. Why use this app instead of Home or other apps ? It's quick, fast and cool !
This application bridges TP-Link Kasa smarthome bulbs and outlets with Apple HomeKit. With no configuration required, the App is very simple to use. You need one or more TP-Link devices on your home wifi network and..
This application bridges TP-Link Kasa smarthome bulbs and outlets with Apple HomeKit. With no configuration required, the App is very simple to use. You need one or more TP-Link devices on your home wifi network and the app needs to run on a mac on the same network. TPL Bridge takes very little processor time or resources, but it does need to be running all the time. Please note this app does not support TP-Link cameras and does not work with the new Tapo devices which use a different protocol. The App creator has no affiliation with TP-Link, but is just an avid user. Their devices can be found at https://www.tp-link.com/smarthome/ TPL Bridge will detect all your TP-Link devices configured on the local network. The TP-Link device can be switched on and off, and where supported by the device, brightness, color temperature or color. It has been tested with HS100, HS110, LB100, LB110, LB120 and LB130, and is likely to work with most other devices in the series. Users report success with KP200, KP210, KP220s. Experimental support included for HS300..
Control your TV with HomeKit ! Using your iPhone, and a Logitech Harmony Hub, this app allows you to switch between AV activities configured on your Harmony Hub. For instance, switch on your TV and hi-fi,..
Control your TV with HomeKit ! Using your iPhone, and a Logitech Harmony Hub, this app allows you to switch between AV activities configured on your Harmony Hub. For instance, switch on your TV and hi-fi, change channel, change volume, etc. Setup HomeKit scenes to switch activities on a simple command to Siri, like Watch TV, or Watch HBO. This application provides the bridge between Logitech Harmony Hubs with Apple HomeKit. Set up your activities with the Logitech Harmony app, and Harmony Bridge will reflect those activities as separate inputs on HomeKit TV accessory. Switch inputs on the HomeKit Television to change activities. Using the iPhone control center remote control, you can change channels, change volume, and navigate around the TV interface as you would do with your Harmony remote control. You need one or more Logitech Harmony Hubs on your home wifi network and the app needs to run day and night on a mac on the same network. Harmony Bridge takes very little processor time or resources, but it does need to be running all the time in..
This application bridges Ambi Climate AC controllers with Apple HomeKit. With no configuration required, the App is very simple to use. You need one Ambi Climate device per AC unit and the app needs to run..
This application bridges Ambi Climate AC controllers with Apple HomeKit. With no configuration required, the App is very simple to use. You need one Ambi Climate device per AC unit and the app needs to run 24/7 on a mac in your home. Ambi Bridge takes very little processor time or resources, but it does need to be running all the time. The App creator has no affiliation with Ambi Labs, but is just an avid user. Their devices can be found at http://www.ambiclimate.com Ambi Bridge will detect all your Ambi Climate devices you have set up when you log in to your Ambi Climate account. You can choose to bridge devices in one or all of your configured locations. HomeKit supports three modes Cool, Heat and Auto, which by default correspond to Ambi Climate modes Away, Temperature and Comfort respectively. These assignments can be changed in the preferences. Ambi Labs, Ambi Climate, and their respective logos are trademarks of Ambi Labs Ltd.